97-010 Low-Lift Blade for Murray
97-010 Low-Lift Blade for Murray
97-010 Low-Lift Blade for Murray is a replacement mower blade with a low-lift profile for the supplier-listed application. Match the complete part number, mounting pattern, dimensions, and equipment configuration before ordering.
Purpose and Value
A worn, bent, or incorrect blade can leave uncut strips, tear grass, increase vibration, and reduce discharge quality. Correct geometry helps restore an even cut and limits avoidable spindle and deck vibration.
Verified Supplier Specifications
| Blade length | 19-7/16" |
|---|---|
| Blade width | 2.25" |
| Thickness | 0.120" |
| Center hole | 13/16" |
| Offset | 3/8 |
| Air lift | 1" |
Supplier-Verified Application Details
Center hole: 13/16" Requires 2 blades for 38" cut Low-lift Superior mulching for bagging and discharge efficiency Enhanced hardening to keep the blade sharper and more durable Replacement for major brand: Murray
Supplier Model and Replacement Guide
MODEL FIT GUIDE AND PARTS CROSS REFERENCE Fit Guide Murray Replacement Guide Laser Murray Rotary Stens Sunbelt
Deck quantity guidance: Requires 2 blades for 38" cut Low-lift Superior mulching for bagging and discharge efficiency Enhanced hardening to keep the blade sharper and more durable Replacement for major brand: Murr. Confirm the exact deck configuration before ordering.
What One Purchase Includes
One blade. Multi-blade decks require the quantity stated for the exact deck.
Fitment Safeguard
Verify the complete OEM or replacement number, mower or engine model, serial range, deck size, mounting pattern, orientation, and required quantity. Similar-looking parts can differ in offset, rotation, hole pattern, thread, connector, or other critical details.
Installation and Service
No product-specific installation manual was verified in the supplier record. Follow the equipment manufacturer's procedure. For blades, stop the engine, remove the key, disconnect the spark-plug lead, secure the blade, wear cut-resistant gloves, install in the correct orientation, and torque hardware to the equipment manufacturer's specification.