6083 High-Lift Blade for Dixie Chopper
6083 High-Lift Blade for Dixie Chopper
6083 High-Lift Blade for Dixie Chopper is a replacement mower blade with a lift-focused profile supporting bagging and side discharge. Match the complete part number, mounting pattern, dimensions, and equipment configuration before ordering.
Purpose and Value
A worn, bent, or incorrect blade can leave uncut strips, tear grass, increase vibration, and reduce discharge quality. Correct geometry helps restore an even cut and limits avoidable spindle and deck vibration.
Verified Supplier Specifications
| Blade length | 20-1/2" |
|---|---|
| Blade width | 2-1/2" |
| Thickness | 0.25" |
| Center hole | 5/8" |
| Cut direction | Clockwise (right) |
Verified Fitment Guidance
HUSTLER: 2 for Mini Fastrack 42, 3 for side discharge and 60" XR-7s EXMARK: LAZER Z, TURF RANGER, ZTR TORO: Z597, Z500 BAD BOY: 3 for 60" cut DIXON: model 8025, 200 and 300 series GRAVELY: Pro 200 and 300 series DIXIE CHOPPER: XXW Series
Supplier Replacement Reference
Replaces BAD BOY: 038-6050-00, 038-2007-00 BUNTON_GOODALL: PL7441 DIXIE CHOPPER: 30227-60, 30227-60N, 30227-60V EXMARK: 633483, 613112, 103-2530, 1-613112, 103-2530-S, 103-0301-S, 1-633483, 103-0301, 103-1580, 613250, 1-613250, 103-1580-S, 103-2530-M, 103-2530-B Toro: 133-2127, 105-7718-03 WINDSOR: 50-2840, 50-2814
Deck quantity guidance: Requires (3) for 60" cut Dixie Chopper & Exmark. Confirm the exact deck configuration before ordering.
What One Purchase Includes
One Rotary 6083 high-lift mower blade. The manufacturer specifies an ordering multiple of one. Deck quantity is separate: three blades are required for the verified 60-inch Dixie Chopper and Exmark applications.
Fitment Safeguard
Verify the complete OEM or replacement number, mower or engine model, serial range, deck size, mounting pattern, orientation, and required quantity. Similar-looking parts can differ in offset, rotation, hole pattern, thread, connector, or other critical details.
Installation and Service
No product-specific installation manual was verified in the supplier record. Follow the equipment manufacturer's procedure. For blades, stop the engine, remove the key, disconnect the spark-plug lead, secure the blade, wear cut-resistant gloves, install in the correct orientation, and torque hardware to the equipment manufacturer's specification.