Silver Streak 362-424 toothed mower blade for AYP 532138497, Craftsman, Husqvarna and Poulan 38-inch decks; one blade shown

Silver Streak 362-424 Toothed Blade for AYP 532138497

$18.99
Skip to product information
Silver Streak 362-424 toothed mower blade for AYP 532138497, Craftsman, Husqvarna and Poulan 38-inch decks; one blade shown

Silver Streak 362-424 Toothed Blade for AYP 532138497

$18.99

Silver Streak 362-424 Toothed Blade is a single replacement mower blade for the exact AYP, Craftsman, Husqvarna, and Poulan references listed below. Its toothed profile helps manage clippings and deck airflow when the complete dimensions and mounting pattern match the mower.

Verified Blade Specifications

Supplier part number 362-424
Length 19 1/4 in.
Width 2 1/2 in.
Thickness 0.187 in.
Center hole 5-point star
Outer holes 3/8 in.
Center-to-center 4 in.

OEM Cross-References

AYP: 12784, 127842, 134148, 138407, 138497, 138970, 139774, 193957, 513897001, 531307221, 532134148, 532138497, 532138970, 581116302, 917127842, 917138497MS, 917138970, 917532138497, 917532138970.

Craftsman: 127842, 134148, 138497, 917127842, 917138497MS, 917138970, 917532138497, 917532138970.

Husqvarna: 532127842, 532134148, 532138497, 532139774.

Poulan: 134148, 138497, 531307221, 532127842, 532134148, 532138497, PP24001.

Verified Fitment and Quantity

The supplier lists this blade for supported AYP, Husqvarna, Poulan, and Poulan Pro 38-inch decks and specifies that two blades are required for a complete deck. One purchase includes one 362-424 blade.

Important Notes

  • Not recommended for use with a mulch kit.
  • The supplier recommends heavy-duty spindle assembly 285-383 for the listed application.

Fitment Safeguard

Match the complete OEM number, mower model, serial number, 38-inch deck configuration, blade length, thickness, 5-point-star center hole, and outer-hole spacing before ordering.

Installation and Safety

Stop the engine, remove the key, disconnect the spark-plug lead, secure the blade, and follow the mower manufacturer's orientation and torque procedures. Inspect the spindle, adapter, hardware, and second blade before operation.

You may also like