Hydro-Gear ZH-GMBB-SB5A-1PLX ZT-2800 Hydrostatic Transaxle
Hydro-Gear ZH-GMBB-SB5A-1PLX ZT-2800 Hydrostatic Transaxle
Hydro-Gear ZH-GMBB-SB5A-1PLX-INTEGRATED ZT-2800 Integrated Hydrostatic Transaxle
The Hydro-Gear ZH-GMBB-SB5A-1PLX-INTEGRATED ZT-2800 Integrated Hydrostatic Transaxle is a matched hydrostatic drive assembly intended to bring smooth control, pulling power, and dependable operation back to the machine it was built for.
Why This Matters
Integrated drive units are not safely interchangeable by appearance or series name alone. The complete build code identifies the internal gearing, axle, brake, control, and mounting configuration.
Fitment Check Before Ordering
- Match the complete model or build code from the original component—not just the product family.
- Confirm the equipment model and serial-number range.
- Compare shaft, mounting, controls, ports, brake, and orientation where applicable.
- If any character differs, send us a clear photo of the original tag before purchase.
Product Details
| Product | Hydro-Gear ZH-GMBB-SB5A-1PLX-INTEGRATED ZT-2800 Integrated Hydrostatic Transaxle |
|---|---|
| Manufacturer / supplier | HydroDrives.com |
| Product family / type | ZT Series, 2800 / 3100, Integrated Hydrostatic Transaxle |
| Build / identification code | ZH-GMBB-SB5A-1PLX |
| SKU | sku-819325399 |
| Supplier cross-reference(s) | ZH-GMBB-3B5A-1PLX — identification/search aids only; confirm exact interchange before ordering |
Documentation
No verified equipment-specific installation PDF is attached to this listing. Manufacturer literature may cover a broader product family. Contact us with the complete build code and machine model if you need the correct service or installation reference.
Ordering, Shipping & Returns
Many HydroDrives-supplied units are built to order and typically require approximately 10–15 business days before shipment. Orders may ship from a U.S. partner warehouse, subject to availability and confirmation.
Approved returns may be subject to a 20% restocking fee, and original shipping charges are nonrefundable. Built-to-order, installed, used, damaged, or fluid-filled units may be nonreturnable. Warranty evaluation may require inspection by an authorized service center.
Need help confirming fitment? Send us the machine model and serial number plus a clear photo of the original component tag before ordering.
Official manufacturer resources
Document note: Match the complete unit code before relying on a manual or parts reference; configurations within the same product family can differ.
Orders may ship directly from a U.S. partner warehouse. Availability and timing are subject to supplier confirmation.