Oregon 492-730 Fusion Series Mower Blade, 20-11/16" for Exmark
Oregon 492-730 Fusion Series Mower Blade, 20-11/16" for Exmark
Oregon 492-730 is a 20-11/16-inch Fusion Series replacement mower blade for supplier-listed Exmark applications. Oregon specifies enhanced hardening and a tungsten-carbide layer fused to the cutting edge to extend the interval between sharpening.
Specifications
- Length: 20-11/16"
- Width: 3.00"
- Thickness: 0.203"
- Center hole: 15/16"
- Offset: 3/8"
- Air lift: 1-1/16"
- Blade family: Fusion Series
Package Quantity
One blade per purchase. Three blades are required for the supplier-listed 60-inch deck configuration; order the quantity required for your exact mower.
Fitment Safeguard
Verify Oregon part number 492-730, the original blade number, mower model and serial range, deck size, blade length, center-hole size, offset, and required quantity before ordering. Similar-looking blades can use different mounting patterns or geometry.
Installation
Stop the engine, remove the key, disconnect the spark-plug lead, secure the blade, and wear cut-resistant gloves. Install in the correct orientation and tighten the hardware to the mower manufacturer's specification.