396-752 Gator G6 Mulching Blade for Dixie Chopper
396-752 Gator G6 Mulching Blade for Dixie Chopper
396-752 Gator G6 Mulching Blade for Dixie Chopper is a replacement mower blade with a mulching-oriented profile that recuts clippings while maintaining airflow. Match the complete part number, mounting pattern, dimensions, and equipment configuration before ordering.
Purpose and Value
A worn, bent, or incorrect blade can leave uncut strips, tear grass, increase vibration, and reduce discharge quality. Correct geometry helps restore an even cut and limits avoidable spindle and deck vibration.
Verified Supplier Specifications
| Blade length | 24-1/16" |
|---|---|
| Blade width | 3.00" |
| Thickness | 0.250" |
| Center hole | 5/8" |
| Offset | 0 |
| Air lift | 1" |
Supplier-Verified Application Details
Center hole: 5/8" Tungsten carbide is “fused” into the blade – creating an ultra-hard layer at the cutting edge and increasing the time between sharpening Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching High-lift: The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution Replacement for major brand: Dixie Chopper
What One Purchase Includes
One blade. Multi-blade decks require the quantity stated for the exact deck.
Fitment Safeguard
Verify the complete OEM or replacement number, mower or engine model, serial range, deck size, mounting pattern, orientation, and required quantity. Similar-looking parts can differ in offset, rotation, hole pattern, thread, connector, or other critical details.
Installation and Service
No product-specific installation manual was verified in the supplier record. Follow the equipment manufacturer's procedure. For blades, stop the engine, remove the key, disconnect the spark-plug lead, secure the blade, wear cut-resistant gloves, install in the correct orientation, and torque hardware to the equipment manufacturer's specification.