310-152 Notched Air-Lift Blade for Bad Boy
310-152 Notched Air-Lift Blade for Bad Boy
Stens 310-152 Notched Air-Lift Blade for Bad Boy is a replacement mower blade with a lift-focused profile that supports bagging and side-discharge airflow. It is intended for equipment that matches the complete verified part-number, mounting, dimension, and model information below.
Why This Part Matters
A worn, bent, or incorrect blade can leave uncut strips, tear grass, increase vibration, and reduce discharge quality. Matching blade geometry and mounting helps restore an even cut while protecting the spindle and deck from avoidable vibration.
Verified Supplier Specifications
| Blade length | 18" |
|---|---|
| Blade width | 2 1/2" |
| Thickness | 0.236" |
| Center hole | 5/8" |
| Outer hole | 1/4" |
| Center-to-center | 1 5/8" |
Replacement and Cross-Reference Numbers
Bad Boy 038-3000-00, 038-5202-00 Bobcat 112111-02, 2722543-02, 32022A, WM132022 Exmark 103-2508, 103-2518, 103-2518-S, 103-2528, 103-6582-S, 103-6584, 103-6584-B, 103-6584-M, 103-6584-S, 1-303146, 1-303283, 1-303495, 1-303527, 1-633482, 303283, 633482, 633484, E633482 Giant Vac A581 Husqvarna 539100341, 539101485 Kees 100341, 363245 Snapper 101485, 1-7037, 1-7344, 363055, 7075751, 7075751BZ, 7075751BZYP, 75751, 7-7344, 7-73447 Toro 103-2528, 105-7779-03, 105-7781, 105-7781-03, 108-1117, 110-0409
Verified Fitment Guidance
Bad Boy Requires 2 for 36" deck; 3 for 54" deck Bobcat Requires 2 for 36" deck; 3 for 54" deck Exmark Requires 2 for 36" deck; 3 for 52" deck Husqvarna Requires 2 for 36" deck; 3 for 52" deck Kees Requires 2 for 36" deck; 3 for 52" deck Snapper Requires 2 for 36" deck; 3 for 52" deck Toro Requires 2 for 36" deck; 3 for 52" deck
Deck quantity guidance: Requires 2 for 36" deck; 3 for 54" deck Bobcat Requires 2 for 36" deck; 3 for 54" deck Exmark Requires 2 for 36" deck; 3 for 52" deck Husqvarna Requi. Confirm deck configuration before ordering.
What One Purchase Includes
The supplier record does not provide a verified package quantity. This listing remains in draft until included quantity is confirmed.
Fitment Safeguard
Do not order from dimensions or appearance alone. Verify the complete OEM or replacement number, mower or engine model, serial range, deck size, mounting pattern, and required quantity. Similar-looking parts can differ in offset, rotation, hole pattern, connector, thread, or other critical details.
Installation and Service
No product-specific installation manual was verified in the supplier record. Follow the equipment manufacturer's service procedure. For blades, stop the engine, remove the key, disconnect the spark-plug lead, block the blade, wear cut-resistant gloves, install in the correct orientation, and torque the fastener to the equipment manufacturer's specification. Replace damaged hardware and verify free rotation before use.
Draft Verification Note
This product remains non-customer-facing while the following supplier-data gaps are resolved: package quantity not verified.